SELECTION: -
These systems are commonly used for:
- Individual machine or small group of machines where each point needs relatively large quantity of lubricant.
- Oil or Grease up to NLGI Class - III
- Different groups of bearings located far away from each other.
- Variable quantity of lubricant for different groups is desired.
AREA OF APPLICATION: -
This system can be ideally employed for medium and large size Presses, Mixing Mills, Sugar Mills, Shears, Punching & Packaging machines, Crushers, Turbines, Cranes, Screw Conveyors, Mining equipments and even Earthmoving equipments with 24 VDC motor in case of Motorised Pumps.
SELF-INSTALL AND SERVICE: -
- Multiline Centralised Lubrication System consists of Multioutlet Pumps, which are to be installed and Pump outlets to be directly connected to bearing points.
- Stirrer in Motorised Pumps and spring loaded follower plate in Manual / Pneumatic Pumps ensure positive suction of viscous lubricants too.
- Output to bearing point can be varied by adjustment of individual outlet or by timer setting. In case of adjustable output type Pump; it can also be run continuously without time control.
EXPANSION POSSIBILITIES: -
- Extra bearing point can be added by equipping Pump with additional Pump element up to 30 nos.
- Combination with progressive distributors increases the scope of system up to say 660 points.
(I.e., 30 outlet Pump with 22 outlet distributors connected to each Pump outlet).
- Higher delivery pressure (350 bar) enables farthest / machine also to be covered by single Pump.
- In case of higher quantity required by single bearing / group, Pump outlets can be combined to get desired output.